2019精品国产品在线不卡

  • <rt id="cisoo"></rt>
    <xmp id="cisoo"><menu id="cisoo"></menu>
  • News

    Contact us

    +86-13840440997

    +86-024-25304445

    www.syips.com

    olivia@syips.cn

    14 Shenda Road Yuhong District, Shenyang,China


    Condensate pump maintenance and maintenance

    You are here: Home >> NEWS >> Technical center

    Condensate pump maintenance and maintenance

    Release date:2015-06-15 16:18 Source:http://www.woodcrestestates.com Views:

    Maintenance and maintenance of condensate pump stainless steel pump

    Temporary withdrawal of stainless steel pump. Dry the moisture, the pump will be all apart. The combination of rotating parts and apply grease to pack, safekeeping.

    It is flexible stainless steel water pump. 1 check the stainless steel pump and pipe and the combination is loose phenomenon. Rotating stainless steel pump with hand.

    To lubricate the bearing in the bearing.. Lubricating oil should be replaced or added in time. To observe the oil level should be in the center line of standard oil.

    Filling water (or lead paste) water diversion plug stainless steel pump body 3 unscrew.

    Off the valve and inlet pressure gauge of the outlet pipe and the inlet vacuum gauge.

    When the motor turning right or not. 5 point motor.

    Starting motor. Open the inlet pressure gauge and import the vacuum pump, and when the stainless steel pump is normal. As shown in the appropriate pressure gradually open the gate valve, and check the motor load.

    Try to control the flow and lift of the stainless steel pump in the range of signs. Ability to get the biggest energy-saving effect. To ensure the stainless steel pump at the highest efficiency point of operation.

    Bearing temperature can not exceed the ambient temperature 35C maximum temperature shall not exceed the 80C8 stainless steel pump during operation.

    Such as found stainless steel pump abnormal noise should be stopped immediately for inspection reasons.

    Stainless steel pump when used. Then stop the motor. Close the gate valve, pressure gauge.

    Stainless steel pump in the first month of the work. After each 500 hours, after 100 hours to replace the lubricant. Oil change time.

    Case packing room of the drip to ensure the normal (to drop out as appropriate) often adjust gland.

    After the wear should be replaced in time. Regularly check the wear sleeve.

    Stainless steel pump used in winter season. The lower part of the pump drain plug unscrew medium net. To prevent cracking. After parking. Condensate pump


    condensate pump

    Related tags:Condensatepump

    Two-dimensional code

    Two-dimensional code

    分享
    message
    Please enter the message content in this。
    name
    Contacts
    Phone
    Landline / mobile
    2019精品国产品在线不卡
  • <rt id="cisoo"></rt>
    <xmp id="cisoo"><menu id="cisoo"></menu>